canam maverick – High Tech Auto Sound

This build highlight is going to focus on our full sound system build for yet another one of our Can-Am Maverick x3. This side by side got a full sound system treatment with a total of 6 high powered DB Drive midrange drivers, and two high powered Twister audio 8inch subwoofers.

Let’s start off this highlight by looking at the custom amp rack we made for this thing. Our amp rack sits flush in the roof and houses all our amplifiers high enough to protect them from the elements. The amp rack is made from the same materials we use to make our UTV bass boxes which are designed to withstand high moisture without swelling and breaking like traditional bass boxes made from MDF.

The elements that make this side-by-side stand out from our other builds is the addition of our custom-made door panel speaker pods. Each of our speaker pods houses a pair of high-powered drivers from DB Drive which comes out to about 500 watts rms combined per each door. But that’s not all- we even added another pair of 8-inch midrange speakers by the port of the custom box bringing the total amount of midrange speakers up to 6!

Can-Am Maverick X3 UTV that has a lift kit installed with aftermarket wheels and tires.

With that much power in our midrange speakers we had to make sure that we had enough bass to balance out the system. That’s why we went with two of Twister Audio’s 8-inch subwoofers that are rated at about 800 watts rms a piece. The woofers are housed in one of our custom-made bandpass woofer boxes which is specifically designed to produce a bass response you can feel even in an open space.

Custom subwoofer box installed on a can-am Maverick X3

If you have any questions about this build or if you want to get a quote on a sound system for your UTV or side-by-side just give us a call!

Remember it’s your ride, made better.

For this build highlight we are going to look at a custom woofer box we made for this 2023 Can-Am Maverick X3! This sound system is designed to handle the outdoor elements and provide a loud and clear sound experience even while outdoors.

Here is an overall breakdown of what this sound system is made of:

4 DS18 Wake-Tower speakers mounted on our custom wake-tower bar.
A fully loaded Rockford Fosgate rooftop enclosure.
2 10” Twister subwoofers.
Our custom-made bandpass box

The crown jewel of this build is our custom-made woofer box. We specifically designed this box to deliver a punch even while you’re out in the middle of a trail or hanging out beachside. One thing that makes our custom UTV boxes stand out is that we don’t use normal MDF wood to make them; instead, we use materials that won’t swell up or break down when exposed to water and humidity.

The woofers used in this sound system come from our friends over at Twister Audio. These tornado series subwoofers are rated at about 1000 watts rms which means they have more than enough power to make sure everyone will hear you jamming.

With the amount of bass this sound system has we had to make sure that our mids and highs delivered a punch too. The addition of 4 DS18 tower speakers adds a perfect balance between voice and bass to our UTV’s sound system to deliver a well-rounded sound.